SALIENT FEATURES
- Infeed hoper from ss 304(optional)
- Infeed screw to pulverizer chamber controls the infeed material in grinding chamber. The screw stops at 85% full load of main motor. The screw starts when the motor load decreases to 75%
- The serrated grinding discs/serrated segments(Round serrated disc in 6 to 8 pcs.) are from high chrome material duly hardened. We recommend use of segments over the use dics. The advantage of using segments over the disc is that wobbling can be controlled within 0.3 mm in face.(In our model plvr 450). This results in more production & wear out of segments in 23mm so that it can be resharpened for three times.
- Water cooling is provided to fix serration plate & bearing housing.
- HEAVY DUTY 'C' class of bearings are used in bearing housing. Bearing housing is from ms casting or from graded casting.
- Gap setting between rotary & fix serrated discs.
- The gap setting is done by inserting feeler gauge between fix & rotary serration segments from outside of the chamber,thus reducing down time.
- The Rotor disc shaft is dynamically balanced.
- The Suction blower is installed on the ground level to facilitate maintenance and cleaning of the blower.
SPECIFICATION
| NO | MODEL NO | PLVZR-450 | PLVZR-600 |
|---|---|---|---|
| 1 | PULVERIZING CAPACITY(OUT PUT KG/HR | 80-1200 KGS/HR | 125-200 KGS/HR |
| 2 | IN FEED SIZE | 3 TO 5MM GRANULES OR SCRAP | 3 TO 5MM GRANULES OR SCRAP |
| 3 | OUT PUT POWDER SIZE | 20-40 MESH | 20-40 MESH |
| 4 | PULVERIZER MOTOR HP | 20-30 HP | 40-50 HP |
| 5 | FEEDER SCREW HP | 1/2 HP | 1 HP |
| 6 | AIR LOCK VALVE WITH GEAR MOTOR | 1 HP 20RPM | 1 HP 20RPM |
| 7 | CIRCULAR VIBRATORY SCREEN | 1.5 HP | 3 HP |
| 8 | SERRATED DISC DIAMETER | 450MM | 600MM |
| 9 | CYCLONE SPECIFICATION | DIA900X1600MM | DIA900X1600MM |
| 10 | SUCTION BLOEWR MOTOR | 5HP | 5PH |
| 11 | SUCTION BLOEWR SPECIFICATION | 1300CFM AT 375MM WATER COLUMN SP | 1500CFM AT 375MM WATER COLUMN SP |
| 12 | DUST COLLECTOR | PROVIDED WITH THE SYSTEM | PROVIDED WITH THE SYSTEM |
| 13 | SIEVE HOLE DIAmm | 20-40 MESH | 20-40 MESH |
| 14 | OUTLET CONNECTION | 6" | 7" |
| 15 | MATERIAL OF CONSTRUCTION | ALLCONTACT PART FROM M.S. OR S.S. CLADING | |
| 16 | APPLICATION | FOR POWDERING OF LLDPE,PVC, GRANNULES&SCRAP SIZE UP TO 5MM | |